Bravada V6-262 4.3L VIN W CPI (1994)
2. Remove the pulley rotor and bearing assembly as described previously. Mark the location of the clutch coil terminals on the compressor.
Removing Poly-Groove Clutch Coil
Removing Poly-Groove Clutch Coil (Optional Method)
3. Install Rotor and Bearing Puller Guide J 25031 to the front head and install Puller J 8433 with Poly-V-Belt Puller Leg Set J 24092 and remove the
clutch coil from the front head. Clutch coil may also be removed by using rotor and bearing puller guide J 25031 with puller tool J 25287.
Install or Connect
1. Place the clutch coil assembly on the neck of the front head with clutch coil terminals in line with mark described in Step 2 of the removal
procedure.
2. Place the pulley rotor and bearing assembly on the neck of the front head and seat the clutch coil and pulley rotor in place using Rotor and Bearing
Installer J 26271-A.