Bravada V6-262 4.3L VIN W CPI (1994)
Control Assembly: Service and Repair
Control Assembly Lamp Bulb
With A/C
REMOVE OR DISCONNECT
1. Heater control assembly. Refer to "Control Assembly and Blower Switch."
^
Pull the heater control assembly out far enough to reach the control assembly lamp bulb socket.
2. Lamp bulb and socket.
3. Lamp bulb from socket.
^
Pull the lamp bulb straight out from the socket.
Inspect
^
Control assembly lamp bulb socket for corrosion and damage. Clean or replace as necessary.
^
Wires for damage and secure connection to the lamp bulb socket. Repair or replace as necessary.
INSTALL OR CONNECT
1. New lamp bulb.
^
Push the lamp bulb straight into the socket.
2. Lamp bulb and socket.
3. Heater control assembly. Refer to "Control Assembly and Blower Switch."
^
Check circuit operation.
Without A/C
REMOVE OR DISCONNECT
1. Heater control assembly. Refer to "Control Assembly and Blower Switch."
^
Pull the heater control assembly out far enough to reach the control assembly lamp bulb socket.
2. Lamp bulb and socket.
3. Lamp bulb from socket.
^
Pull the lamp bulb straight out from the socket.
Inspect
^
Control assembly lamp bulb socket for corrosion and damage. Clean or replace as necessary.
^
Wires for damage and secure connection to the lamp bulb socket. Repair or replace as necessary.
INSTALL OR CONNECT
1. New lamp bulb.
^
Push the lamp bulb straight into the socket.
2. Lamp bulb and socket.
3. Heater control assembly. Refer to "Control Assembly and Blower Switch."
^
Check circuit operation.