Bravada V6-262 4.3L VIN W CPI (1994)
Upper Intake Manifold 4.3W
4. Crankcase ventilation hose to upper intake manifold.
5. Vacuum hoses to front and rear of upper intake manifold.
6. Throttle and cruise cable to upper intake manifold.
7. Ignition coil.
8. Air cleaner tube.
9. Wire harnesses, including:
-
Throttle Position (TP) sensor
-
Idle Air Control (IAC) motor.
-
Manifold Absolute Pressure (MAP) sensor.
-
Intake manifold tuning valve assembly.
10. Plastic cover.
Thread-Locking Material
Important
The hardware used to attach the Throttle Position (TP) sensor, Idle Air Control (IAC) valve, Intake Manifold Tuning Valve and MAP sensor, are
coated with thread-locking adhesive. If any of these parts are removed for service, inspect the attaching screw threads. There should be enough
thread-locking material (adhesive or compound) on the threads to insure proper relocking. If not, clean the screw threads and apply Loctite 262, or
equivalent, to the threads before reassembly. Replacement screws are included in the service screw assortment package. New attaching hardware is
included in the service packages.
