Bravada V6-262 4.3L VIN Z (1991)
Install the TPS onto replacement throttle body assembly. Refer to THROTTLE POSITION SENSOR (TPS).
INSTALLATION:
1.
Install the new throttle body to fuel meter body gasket.
2.
Install the fuel meter body assembly on throttle body assembly.
3.
Install the fuel meter body to throttle body attaching screws that have been coated with locking compound. Tighten the attaching screw assemblies
to 4.0 Nm (3.50 lb-in).
4.
Install TBI unit onto intake manifold. Tighten the mounting bolts to 16.0 Nm (12.0 lb-ft).