Bravada 2WD L6-4.2L VIN S (2002)
Fog/Driving Lamp Relay: Service and Repair
Fog Lamp Relay Replacement (RPO T96)
TOOLS REQUIRED
J 43244 Relay Puller Pliers
REMOVAL PROCEDURE
1. Open and support the hood.
2. Remove the protective covers from the underhood junction block.
3. Use the J 43244 in order to remove the fog lamp relay (1) from the underhood junction block.
INSTALLATION PROCEDURE
1. Use the J 43244 in order to install the fog lamp relay (1) to the underhood junction block.
2. Install the protective covers to the underhood junction block.
3. Close the hood.
For a description of the RPO Code(s) shown in this article/images refer to the RPO Code List found at Vehicle/Application ID. See: Application and
ID/RPO Codes