Bravada 4WD V8-5.3L VIN P (2004)
1. Install the screws securing the seat cushion trim panel to the seat cushion assembly.
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten the rear seat cushion trim panel screws to 2 N.m (18 lb in).
2. Install the seat cover J-strips (1) to the seat cushion trim panel (2).
3. Install the two bolts (2) securing the support (1) to the seat cushion trim panel.
Tighten the rear seat support bolts to 35 N.m (26 lb ft).
4. Install the rear seat bracket with the four mounting nuts (2).
Tighten the rear seat bracket mounting nuts to 25 N.m (18 lb ft).