Bravada 4WD V8-5.3L VIN P (2004)
Important: Ensure that the relationship marks on the brake rotor and the wheel stud are aligned before installing the brake rotor.
1. Install the brake rotor to the wheel hub.
2. Install the brake caliper assembly to the steering knuckle.
Notice: Refer to Fastener Notice in Service Precautions.
3. Install the brake caliper mounting bolt.
Tighten the brake caliper bracket mounting bolt to 150 Nm (110 ft. lbs.).
4. Install the tire and wheel assembly.
5. Lower the vehicle.
6. Fill the brake master cylinder to the proper level.