Bravada 4WD V8-5.3L VIN P (2004)
Fuel Tank Pressure Sensor: Service and Repair
FUEL TANK PRESSURE SENSOR REPLACEMENT
REMOVAL PROCEDURE
1. Raise and suitably support the vehicle. Refer to Vehicle Lifting.
2. Disconnect the fuel tank pressure sensor electrical connector (3).
3. Open the retaining clip.
4. Remove the fuel tank pressure sensor.
INSTALLATION PROCEDURE
1. Install the fuel tank pressure sensor.
2. Close the retaining clip.
3. Connect the fuel tank pressure sensor electrical connector (3).
4. Lower the vehicle.