Bravada 4WD V8-5.3L VIN P (2004)
12. Inspect the J38826 SIR deployment harness (1) and the appropriate pigtail adapter(2) for damage. Replace as needed.
13. Short the 2 SIR deployment harness (1) leads together using one banana plug seated into the other.
14. Connect the appropriate pigtail adapter (2) to the SIR deployment harness (1).
15. Extend the SIR deployment harness and adapter to full length from the deployment fixture.
IMPORTANT: On a dual stage inflator module, both connectors must be attached to the deployment harness adapter. This will ensure that both
stage 1 and stage 2 of the deployment loops are energized, regardless of the deployment state.
