Bravada 4WD V8-5.3L VIN P (2004)
5. Install the passenger air duct extension screw (1).
Tighten
Tighten the screw to 2.5 N.m (22 lb in).
6. Close the I/P compartment door.
7. Install the passenger side I/P access panel.
8. Enable the SIR System.
Inflator Module Handling and Scrapping
INFLATOR MODULE HANDLING AND SCRAPPING
GENERAL INFORMATION AND TERMS
Do NOT deploy the inflator module in the following situations:
-
After replacement of an inflator module under warranty-The inflator module may need to be returned undeployed to the manufacturer.
-
If the vehicle is the subject of a product liability report (1241) related to the SIR or seat belt system-When a vehicle is the subject of a product
liability report, do not alter the SIR or seat belt system in any manner.
-
If the vehicle is involved in a campaign affecting the inflator modules-Follow the instructions in the campaign service bulletin for proper SIR
handling procedures.
Deployment Procedures: The inflator module can be deployed inside or outside of the vehicle. The method used depends upon the final disposition
of the vehicle. Review each procedure in order to determine which will work best in a given situation.
Dual Stage Inflator Module: Dual stage inflator modules have 2 deployment stages. If stage 1 was used to deploy a dual stage inflator module, stage
