Bravada 4WD V8-5.3L VIN P (2004)
Wiper Switch: Service and Repair
WIPER/WASHER SWITCH REPLACEMENT - REAR
REMOVAL PROCEDURE
1. Remove the instrument panel (IP) acessory trim plate.
2. Disconnect the electrical connector from the wiper washer switch.
3. Release the wiper washer switch locking tabs.
4. Remove the switch from the trim plate.
INSTALLATION PROCEDURE
1. Position the switch to the trim plate.
2. Connect the electrical connector to the wiper washer switch.
3. Install the switch to the instrument panel trim plate, ensuring that the locking tabs are properly seated.
4. Install the instrument panel (IP) acessory trim plate.
