oldsmobile Workshop Repair Guides

Oldsmobile Workshop Service and Repair Manuals

Transmission Position Switch/Sensor, A/T > < Transmission Mount Replacement|Page 4894
Page 1
background image

Transmission Mount: Service and Repair
Transmission Mount Spacer -Replacement

Transmission Mount Spacer -Replacement 

Removal Procedure

1. Raise the vehicle. 
2. Remove the transmission mount. 
3. Remove the transmission mount spacer mounting bolts (2).
4. Remove the transmission mount spacer (1).

Installation Procedure

Notice:  Refer to Fastener Notice in Cautions and Notices.

1. Install the transmission mount spacer (1).
2. Install the transmission mount spacer mounting bolts (2).

^

Tighten the bolts to 65 Nm (48 ft. lbs.).

3. Install the transmission mount. 
4. Lower the vehicle.

Transmission Position Switch/Sensor, A/T > < Transmission Mount Replacement|Page 4894