Bravada 4WD V8-5.3L VIN P (2004)
1. Raise the vehicle.
2. Remove the transfer case assembly.
Notice: Refer to Transfer Case Seal Removal Notice in cautions and Notices..
Notice: Do not damage the sealing surfaces of the transfer cases or the shafts when prying the seals for removal. Damaging the sealing surface may
cause leakage or require replacement of the damaged component.
3. Insert a flat-bladed screw driver between the input shaft seal and the transfer case.
4. Pry the front input shaft seal from the transfer case!.
5. Remove the front input shaft seal.
Installation Procedure
1. Align the input shaft seal on the input shaft.
2. Using the J 42738, install the input shaft seal.