oldsmobile Workshop Repair Guides

Oldsmobile Workshop Service and Repair Manuals

Doors - Trim Pad Repair For Vinyl Bridging At Arm Rest|Page 6012 > < Body - Polypropylene Energy Absorber Replacement
Page 1
background image

Front Door Panel: Technical Service Bulletins
Doors - Trim Pad Repair For Vinyl Bridging At Arm Rest

SUBJECT:

DOOR TRIM PAD REPAIR FOR VINYL BRIDGING AT ARM REST

MODELS/YEARS:

1987-89 CUTLASS CALAIS COUPE

NUMBER:

89-T-38A

CORP. REF. NO:  971601

DATE:

February 1989

SECTION:

10

FIGURE 1

This bulletin supersedes Dealer Technical Bulletin 89-T-38 which should be destroyed. An additional labor operation number has been added.

Some 1987-1989 Cutlass Calais coupe models may have a condition of vinyl bridging (blisters) on the armrest at the trim pad junction. This is due to
insufficient glue in this area.

Use the following procedure to repair the condition:

1.

Remove the trim pad assembly from the door.

2.

Loosen the upper insert cover of the trim pad by straightening the tabs and peeling the material loose at the rear of the door trim pad (the outside
layers only) Figure 1.

Doors - Trim Pad Repair For Vinyl Bridging At Arm Rest|Page 6012 > < Body - Polypropylene Energy Absorber Replacement