Calais L4-151 2.5L VIN U TBI (1989)
Exhaust Pipe/Muffler Hanger: Technical Service Bulletins
Exhaust System - Rattle From Muffler Belly Band
SUBJECT:
EXHAUST SYSTEM RATTLE - INSTALL WASHER TO TIGHTEN BELLY BAND AROUND MUFFLER)
MODELS/YEARS:
1989 CUTLASS CALAIS
NUMBER:
89-T-89
CORP. REF. NO: 976601
DATE:
July 1989
SECTION:
6F
Figure 1
Customers may comment about a rattle type noise coming from the rear of the vehicle. This noise may be caused by the muffler trap or belly band, not
being sufficiently tight around the muffler, which can result in a rattle between the muffler and belly band.
This condition can be corrected by installing washer, part number 14034623, as shown in Figure 1, and tightening to 16 N-m (12 ft.lbs.) Part is currently
available through GMSPO.
IMPORTANT:
The belly band must be properly positioned between the locating dimples on the muffler.
WARRANTY INFORMATION:
Labor Operation Number:
T4652
Labor Hours:
.2 hr.
Trouble Code:
92