Calais L4-151 2.5L VIN U TBI (1989)
INSTALLATION:
1.
Install the throttle body assembly with a new flange gasket.
2.
Install the throttle body attaching bolts and tighten to 25 Nm (18 lb. ft.).
3.
Install new O-rings on fuel lines.
4.
Install fuel lines and tighten to 27 Nm (20 lb. ft.). Use backup fuel line wrench on the TBI fuel nuts to prevent them from turning.
5.
Connect the throttle, T.V., and cruise control cables.
NOTE: Make sure that the throttle and cruise control cables do not hold the throttle open.
6.
Connect the vacuum lines.
7.
Connect the IAC and TPS electrical connectors.
8.
Connect the negative battery cable.
9.
With the engine OFF, check to see that the accelerator pedal is free, depress the accelerator pedal to the floor and release.
10.
Start engine and check for leaks.