Ciera V6-173 2.8L VIN W FI (1986)
resulting damage and/or personal injury.
FIGURE 1
If tires are replaced, put the two (2) new tires on the front and move the front tires to the rear position. After 7,500 miles, tires should be rotated
following the modified "X" pattern. See Figure 1.
If the tires are not replaced, rotate the tires using the modified "X" pattern. This will tend to even out normal heel/toe tread wear.
PARTS INFORMATION
One (1) shim kit part number 14094481.
Kit includes:
Two (2) shims (part number 14094467) Eight (8) bolts (part number 25519720) One (1) instruction sheet (part number 14094482)
WARRANTY INFORMATION
Trouble Code
Labor Operation
Labor Hours
92
T1141
.7
Technical Service Bulletin # 86T35
Date: 860501
Tires (All-Season) - Irregular or Premature Tire Wear
SUBJECT
IRREGULAR/PREMATURE TIRE WEAR -
NUMBER: 86-T-35
ALL-SEASON TIRES
DATE:
May 14, 1986
1985 TORONADO & 1985-86 CUTLASS CIERA
MODELS/YEARS
REAR POSITION ONLY
1985 DELTA 88 & 1985-86 CUTLASS
SECTION: 3E
SUPREME FRONT POSITION ONLY
CONDITION
Some 1985 Toronado, 1985-86 Cutlass Ciera, 1985 Delta 88 and 1985-86 Cutlass Supreme models with original equipment All-Seasons tires ("M & S"
following the TPC Spec. No.) may experience premature/irregular tire wear on non-drive axles. The wear may be identified as a cupping condition,
usually on the outer shoulder of the tire. If allowed to continue, premature wear out of tread may occur.