Custom Cruiser RWD V8-350 5.7L (1992)
b.
Place finger over the number 1 spark plug hole and crank engine slowly until compression is felt.
c.
Align timing mark on pulley to "0" on engine timing indicator.
d.
Turn rotor to point to number 1 or number 8 spark plug towers on the distributor cap.
7.
Install the distributor.
8.
Install distributor hold-down clamp and distributor clamp bolt. Tighten clamp bolt to 36 N-m (27 lb. ft.).
9.
Install rotor in the same position at which it was removed.
10.
Install distributor cap and secondary wires.
11.
Connect four terminal ECM harness and B+/C- connector to distributor.
12.
Check engine timing.
