Cutlass L4-138 2.3L VIN A FI HP (1990)
Weatherstrip: Customer Interest
Door Vent Glass Rubber Retainer, Rear - Turns White
SUBJECT
REAR DOOR VENT GLASS RUBBER RETAINER
TURNS WHITE (SERVICE PROCEDURE)
MODELS/YEARS
1990 CUTLASS SUPREME SEDAN MODELS
NUMBER:
90-T-28
CORP.REF.NO: 931057
DATE:
December 1989
SECTION:
10-5
Owners of some 1990 Cutlass Supreme sedan models may comment on a white powder type substance on the rubber seal of the rear door vent glass
rubber retainer. To eliminate this bleed-out, clean the outside surface with Fantastic(R) or equivalent cleaner and a small scrub brush. After rubber seal is
completely dry and clean, dress rubber seal with a rubber/vinyl sealer, such as Armorall(R) protectant available from GMSPO, part numbers, 1052918 8
oz. size 1052919 16 oz. size 1052920 20 oz. size
Parts are currently available from GMSPO.
Other sealers are Wesley(R) Color Magic, 3M(R) Prep Team Natural Glass Vinyl/Rubber Dressing # 05943.
Apply dresslng following manufacturers instructions.
IMPORTANT:
If a new rear door quarter glass rubber retainer is required, clean and seal new parts from GMSPO before installing on vehicle.
A new rear door quarter glass rubber retainer will be released in the near future and a new part number will be assigned.
WARRANTY INFORMATION:
Labor Operation Number:
T1539
Labor Time:
0.6 Hour For Both Sides
Trouble Code:
92