Cutlass L4-138 2.3L VIN A FI HP (1990)
Camshaft Housing, Cover And Gaskets
10. Using J 36660 or equivalent, install bolts and tighten to specification in sequence. Then rotate the bolts the amount of degrees specified in
sequence.
11. Timing chain housing and timing chain. Refer to Timing Cover and Timing Chain.
12. Exhaust camshaft housing cover and new gasket. Tighten to 14 Nm (10 lbs. ft.).
13. Transaxle fluid level indicator tube assembly to exhaust camshaft cover.
14. Electrical connection to oil pressure switch.
15. Reinstall any spark plugs boot connector assembly that stuck to a spark plug, back onto the ignition coil and module assembly.