Cutlass L4-138 2.3L VIN A FI HP (1990)
12.
Apply the adhesive to the trim cover by placing brown backing paper with adhesive onto the trim cover and press firmly. Carefully remove the
brown backing paper. Be sure the adhesive remains on the trim cover (Figure 4, Views "A", "B" & "C").
13.
Affix the plastic shoulder belt cover plug to the trim cover, taking care to center the cap over the hole and adhesive area (Figure 4, View "D").
14.
Repeat the above steps, 1-13, for the opposite front door of the vehicle.
15.
Install a Campaign Identification Label.
Campaign Identification Label and Parts Info.