oldsmobile Workshop Repair Guides

Oldsmobile Workshop Service and Repair Manuals

A/T - Two Plate 4TH Clutch and Destressed 4TH Clutch|Page 4090 > < A/T - Two Plate 4TH Clutch and Destressed 4TH Clutch|Page 4088
Page 4
background image

18017246

Plate Assembly - 4th Clutch

1990

*OBAH *OBDH *OBFH

(fiber for two plate type)

*OBHH *OBJH *OBPH
*OBWH

Parts are expected to be available for part numbers 18017246, 8661004 and 8661006 on 12-15-89. Until then, normal part orders will not be accepted by
GMSPO. Only verifiable emergency VIP orders will be accepted. SPO will make every effort to obtain parts. All parts will be placed on 400 control to
waive VIP surcharges. However, the part will be shipped premium transportation at dealer's expense. All other order types will be canceled as incorrectly
ordered while the 400 control is in place.
Parts are currently available for part numbers 8662986 and 8662989 from GMSPO.

*

Models were produced for a short time from SOP 1990 to July 31, 1989 (Julian Date 212) with the two plate 4th clutch. Starting July 31, 1989
(Julian Date 212) these models were built wfth the single plate 4th clutch.

SERVICE MANUAL REFERENCE:

Refer to the appropriate 1990 Service Information Manual for service procedures.

II.Distressed Two Plate 4TH Clutch Assembly Service

Figure 2 - Single And Two Plate 4TH Clutch Assemblies

INFORMATION FOR 3300 AND 3800 ENGINE TRANSAXLE MODELS

A/T - Two Plate 4TH Clutch and Destressed 4TH Clutch|Page 4090 > < A/T - Two Plate 4TH Clutch and Destressed 4TH Clutch|Page 4088