Cutlass V6-189 3.1L VIN T FI (1990)
Instrument Cluster / Carrier: Service and Repair
1.
Disconnect battery ground cable.
2.
Remove five Phillips head screws at top of trim plate and pull top of trim plate out.
3.
Starting at either side, carefully pull bottom of trim plate to release five spring clips.
4.
Remove trim plate.
5.
Disconnect shift indicator cable, if equipped.
6.
Remove four bolts attaching cluster to carrier.
7.
Pull cluster forward and disconnect cluster connector.
8.
Remove cluster.
9.
Reverse procedure to install.