Cutlass V6-191 3.1L VIN M SFI (1998)
3.
Remove the two upper push-in retainers (2) from the left splash deflector.
4.
Position the deflector out of the way by pulling the top downward.
5.
Reposition the hood release cable (1) from below the splash deflector to above the splash deflector.
6.
Reinstall the two splash deflector push-in retainers (1).
7.
Lower the vehicle.
8.
Close and reopen the hood to insure proper operation.
Warranty Information
For vehicles repaired under warranty, use the table.
Disclaimer