Cutlass V6-191 3.1L VIN M SFI (1998)
endorse, indicate any preference for or assume any responsibility for the products from this source or for any such products which may be
available from other sources.
6.
Mask and refinish area(s) as required, using products found in the GM Refinish Material Booklet # 4901-MD-98.
Important:
Always follow paint manufacturer's procedures and processes for their products.
7.
Install front door upper trim finish panel and install outside rearview mirror and reposition upper auxiliary weatherstrip.
Parts Information
P/N
Description
12378262
Seam Sealing Pad
Parts are currently available from GMSPO.
Warranty Information
For vehicles repaired under warranty, use:
Labor Operation
Description
Labor Time
A7679 - Left Frt
Door Front - Spot
0.8 hr
Repair Paint
A7689 - Right Frt
Material Code: GD
Per Side
Technical Service Bulletin # 33-17-01A
Date: 971201
Exhaust System - Paint Peeling from Painted Muffler
File In Section: 10 - Body
Bulletin No.: 33-17-01A
Date: December, 1997
Subject:
Paint Peeling from Muffler
(New Repair Paint Available)
Models:
1993-98 Passenger Cars with Painted Mufflers
This bulletin is being revised to add additional model years. Please discard Corporate Bulletin Number 33-17-01 (Section 10 - Body).
Condition
Some owners may experience paint peeling from the muffler.
Correction
Clean and repaint the affected area using the following procedure and product.
Important:
DO NOT REPLACE COMPONENTS TO REPAIR THIS CONDITION.
The exhaust system must be cold to begin this procedure.
Material Required: * Wabash Products # KB-318-HHHS, available in pints or quarts as ready to spray material (no mixing required). Call Wabash
Products, 1-800-326-7269 or 812-232-6097 for pricing and shipping information.
Procedure
On a cold exhaust system: