Cutlass V6-191 3.1L VIN M SFI (1998)
Electronic Brake Control Module: Service and Repair
Electronic Brake Control Module Replacement
REMOVAL PROCEDURE
1. Remove the left front tire and wheel assembly.
2. Remove the inner splash shield.
3. Disconnect the Electronic Brake Control Module (EBCM) electrical connector.
4. Disconnect the EBCM harness from the bracket.
5. Remove the EBCM mounting screws from the bracket.
6. Remove the EBCM from the vehicle.
INSTALLATION PROCEDURE
1. Install the EBCM to vehicle.