Cutlass V6-191 3.1L VIN M SFI (1998)
5. Hold the sprocket with the chain hanging down.
6. Install the timing chain to the crankshaft gear.
7. Align the centerline of the locator hole, on the camshaft gear, with the timing mark on the top of the timing chain dampener.
8. Align the dowel in the camshaft with the dowel hole in the camshaft sprocket.
9. Use the mounting bolts in order to draw the camshaft sprocket onto the camshaft.
^
Tighten the mounting bolts to 100 Nm (74 ft. lbs.).
NOTICE: Refer to Fastener Notice in Service Precautions.
10. Lubricate the timing chain with engine oil.
11. Install the crankcase front cover. Refer to Engine Front Cover Replacement
12. Fill the cooling system. Refer to Draining, Flushing and Filling the Cooling System in Cooling and Radiator.
13. Connect the negative battery cable.
