Cutlass V6-191 3.1L VIN M SFI (1998)
1. Rotate the belt tensioner. Use the J39914.
2. Install the drive belt.
3. Install the auxiliary bracket.
4. Install the auxiliary bracket fasteners.
^
Tighten the fasteners to 50 Nm (37 ft. lbs.).
NOTICE: Refer to Fastener Notice in Service Precautions.
5. Install the engine mount assembly to the engine mount bracket support bolts. Refer to Engine Mount Replacement.
6. Remove the floor jack.
7. Connect the negative battery cable.
