Cutlass V6-191 3.1L VIN M SFI (1998)
5. Install the transmission converter cover.
6. Install the starter. Refer to Starter in Cranking Systems.
7. Install the oil filter.
8. Install the engine to transmission brace. Refer to Transmission Brace in Automatic Transmission.
9. Loosely assemble the A/C compressor spacer and the upper bolts. Secure the spacer and the bolts in place.
10. Install the A/C compressor to the engine. Refer to Compressor Assembly in Air Conditioning.
11. Install the right side suspension support. Refer to Suspension Support in Suspension.
12. Install the right side stabilizer bar. Refer to Stabilizer Bar in Suspension.
13. Install the right side ball joint. Refer to Ball Joint in Suspension.
14. Connect the right front ABS wheel speed sensor harness.
15. Install the right splash shield. Refer to Splash Shield Replacement in Bumpers.
16. Install the right front tire and wheel assembly. Refer to Wheel Installation in Tires and Wheels.
17. Lower the vehicle.
18. Install the drive belt. Refer to Accessory Drive Belt Replacement.
19. Fill the crankcase.
20. Connect the negative battery cable.
