Cutlass V6-191 3.1L VIN M SFI (1998)
16. Install the A/C compressor to the oil pan bolts.
17. Install the right suspension support. Refer to Suspension Support in Suspension.
18. Install the stabilizer shaft to the right suspension support and the control arm.
19. Install the right ball joint. Refer to Ball Joint in Suspension.
20. Install the right wheel speed sensor connector and the wire harness to the suspension support.
21. Install the drive belt tensioner. Refer to Accessory drive Belt Tensioner Replacement.
22. Install the crankshaft balancer. Refer to Crankshaft Balancer Replacement.
23. Install the flywheel inspection cover.
24. Install the right splash shield. Refer to Splash Shield Replacement in Bumpers.
25. Install the right front tire and wheel assembly. Refer to Wheel Installation in Tires and Wheels.
26. Lower the vehicle.
27. Install the A/C compressor top bolts.
28. Install the power steering pump. Refer to Power Steering Pump in Power Steering Pump and Gear.
29. Install the drive belt. Refer to Accessory Drive Belt Replacement.
30. Install the engine mount bracket support and bolts.
^
Tighten the 8 mm bolts to 20 Nm (15 ft. lbs.).
^
Tighten the 12 mm bolts to 40 Nm (30 ft. lbs.).