Cutlass V6-191 3.1L VIN M SFI (1998)
Alignment: Service and Repair
Front Wheel Alignment
Measuring Front Alignment Angles
Important:
-
Install the alignment equipment following the equipment manufacturer's instructions.
-
Jounce the front and rear bumpers three times in order to normalize the suspension prior to measuring the angles.
-
Measure the alignment angles and record the readings. If the adjustments are necessary, you must make them in the following order:
1. Camber.
2. Toe.
Front Caster Adjustment
The caster is not adjustable. If the caster angle is not within specifications, inspect for suspension support misalignment or front suspension damage.
Replace the parts as necessary. Refer to Alignment Checking in Body Dimensions and Underbody. The alignment checking lists measurement points in
order to determine the proper underbody alignment.
Front Camber Adjustment
1. Reach around the tire, using the appropriate extension and socket (1).
