Cutlass V6-191 3.1L VIN M SFI (1998)
1. Install the seal and inlet pipe.
2. Connect the cover to the inlet pipe bolt.
^
Tighten the bolt to 14 Nm (124 inch lbs.).
NOTICE: Refer to Fastener Notice in Service Precautions.
3. Install the inlet pipe to the oil pan bolt.
^
Tighten the bolt to 26 Nm (19 ft. lbs.).
4. Connect the radiator hose to the inlet pipe.
5. Lower the vehicle.
6. Install the coolant inlet pipe bolt through the exhaust manifold.
^
Tighten the bolt to 14 Nm (124 inch lbs.).
7. Install the exhaust manifold heat shield.
8. Fill the cooling system. Refer to Draining and Filling Cooling System.