Cutlass V6-191 3.1L VIN M SFI (1998)
-
Inspect the wheel alignment
-
Inspect for dragging of the front brake.
-
Inspect for high friction in the ball joints or the strut mounts.
-
Inspect for unbalanced pinion and valve.
The way in which a tire is built can produce lead in a vehicle. An example of this is placement of the belt. Off-center belts on radial tires can cause the
tire to develop a side force while rolling straight down the road and the tire will tend to roll like a cone.
The Radial Tire Lead/Pull Correction chart should be used in order to ensure that the front wheel alignment is not mistaken for tire lead. Rear tires will
not cause lead.