Cutlass V6-191 3.1L VIN M SFI (1998)
2. Inner tie rod (12) on rack.
^
Place a wrench on flats of rack assembly.
^
Place another wrench on flats of inner tie rod housing.
^
Tighten inner tie rod (12) to 100 Nm (74 ft. lbs.).
3. Slide shock dampener (13) over inner tie rod housing until it engages.
4. Do all steps under "INSTALL OR CONNECT," refer to RACK & PINION BOOT.
5. Rack and pinion assembly to vehicle.
Cylinder Line Assembly and O-Ring Seals