Cutlass V6-191 3.1L VIN M SFI (1998)
Steering Wheel: Service and Repair
Steering Wheel
Steering Wheel
^
Tool Required:
-
J 1859-A Steering Wheel Puller
-
J 42120 Steering Wheel Puller Jaws
Remove or Disconnect
1. Disable the SIR system.
2. Inflator module, horn, and cruise control connections.
3. Nut.
4. Steering wheel.
Install or Connect
1. Steering wheel. Align mark on steering wheel with mark on shaft.
2. Nut.
Tighten
-
Steering wheel nut to 41 N.m (30 lb ft).
3. Horn connection and Inflator module.
4. Enable the SIR system.