Cutlass V6-191 3.1L VIN M SFI (1998)
Stabilizer Link: Service and Repair
Rear Suspension
REMOVAL PROCEDURE
1. Raise the vehicle and suitably support the vehicle.
2. Remove the rear stabilizer shaft link bolt (3).
3. Remove the rear stabilizer shaft link (2) from the knuckle (1).
4. Remove the link (2) from the stabilizer shaft (4).
INSTALLATION PROCEDURE
1. Connect the link (2) to the stabilizer shaft (4).
2. Connect the rear stabilizer shaft link.(2) to the knuckle (1).
Tighten
-
Tighten the rear stabilizer shaft link to knuckle bolt (3) to 69 N.m (51 lb ft).
3. Lower the vehicle.