Cutlass V6-191 3.1L VIN M SFI (1998)
2. Align the steering knuckle with the strut flange scribe mark and install the bolts (6) and nuts (2).
Tighten
-
Tighten the nuts to 180 N.m (133 lb ft).
3. Tighten the nuts, (1) and bolt (2) attaching the top of the strut assembly to the body (3).
Tighten
-
Tighten the nuts to 25 N.m (18 lb ft).
-
Tighten the bolt to 25 N.m (18 lb ft).
4. Install the brake line bracket.
5. If a suspension contact hoist is used:
-
Slightly raise the vehicle.
-
Remove the jack stands from under the crossmember.
6. Install the tire and wheel assembly. Refer to Wheel Installation.
7. Check the front wheel alignment. Refer to Fastener Tightening Specifications.