Cutlass V6-191 3.1L VIN M SFI (1998)
INSTALLATION PROCEDURE
1. Install the front door upper trim panel (1) insert.
2. Insert the tabs to the retainers.
3. Apply pressure in order to secure the panel.
Door Handle Bezel Replacement
DOOR HANDLE BEZEL REPLACEMENT
REMOVAL PROCEDURE
1. Remove the door handle bezel screw (1) from the handle bezel(2).
2. Remove the power door lock switch, if equipped.
INSTALLATION PROCEDURE
1. Install the power door lock switch, if equipped.
NOTE: Refer to Fastener Notice in Service Precautions.
2. Install the door handle bezel screw (1) to the door handle bezel (2).
Tighten
Tighten the door handle bezel screw to 2 Nm (20 lb in).
Window Regulator Handle Replacement
WINDOW REGULATOR HANDLE REPLACEMENT
REMOVAL PROCEDURE
TOOLS REQUIRED
J9886-01 Door Handle Clip Remover