Cutlass V6-191 3.1L VIN M SFI (1998)
Windshield Washer Pump: Service and Repair
REMOVE OR DISCONNECT
1. Washer solvent container assembly from vehicle. Refer to "Washer Solvent Container Assembly Replacement." See: Windshield Washer
Reservoir/Service and Repair
2. Drain solvent from washer solvent container assembly (7).
3. Washer pump (3) from washer solvent container assembly (7).
A. Pull top of washer pump (3) out from side of washer solvent container assembly (7).
B. Pull washer pump (3) up out of washer solvent container assembly (7).
4. Seal (8) from washer solvent container assembly (7).
INSTALL OR CONNECT
IMPORTANT
^
Lubricate seal with windshield washer solvent to ease installation.
1. Seal (8) in washer solvent container assembly (7).
2. Washer pump (3) in washer solvent container assembly (7).
A. Push washer pump (3) down into washer solvent container assembly (7) completely.
B. Push top of washer pump (3) into side of washer solvent container assembly (7).
3. Washer solvent container assembly on vehicle. Refer to "Washer Solvent Container Assembly Replacement." See: Windshield Washer
Reservoir/Service and Repair
4. Fill washer solvent container assembly (7) with solvent.