Cutlass V8-350 5.7L DSL (1984)
![background image](/oldsmobile/cutlass/v8-350_5.7l_dsl/Page-196002.png)
5.
Apply suitable sealer to outside diameter of new oil seal.
6.
File .020 inch from flange of tool No. J-25264, Fig. 29, to prevent tool from contacting oil slinger before seal is properly seated in front cover.
7.
Using tool BT-6611, install new oil seal, Fig. 30.
8.
Install harmonic balancer and crankshaft pulley.
9.
Install and tension accessory drive belts.