Cutlass Ciera L4-2.2L VIN 4 (1995)
^
Check for a broken (or partially broken) wire inside of the insulation which could cause system malfunction but prove "GOOD" in a
continuity/voltage check with a system disconnected. These circuits may be intermittent or resistive when loaded, and if possible, should be
checked by monitoring for a voltage drop with the system operational (under load).
^
Check for proper installation of aftermarket electronic equipment which may affect the integrity of other systems refer to Diagnostic Aids.
See: Diagrams/Diagnostic Aids
^
Refer to System Diagnosis. See: Diagnostic Trouble Code Tests and Associated Procedures/System Diagnosis