Cutlass Ciera V6-173 2.8L (1988)
Brake Master Cylinder: Service and Repair
Compact Master Cylinder
Removal
For additional information see Notes, Warnings, and Hints. See: Fundamentals and Basics
NOTE: If any hydraulic component is removed or disconnected, it may be necessary to bleed all or part of the brake system.
CAUTION: Brake fluid will damage painted surfaces. Brake fluid can also damage electrical connections. Shop cloths and clean containers
should be used to prevent spillage of brake fluid.
Fluid Level Sensor
1. Remove electrical connector from fluid level sensor (1).
Removing Master Cylinder Assembly
2. Remove brake pipe tube nuts (22) from master cylinder assembly (21).
3. Plug open brake pipes to prevent brake fluid loss and contamination.
4. Remove master cylinder mounting nuts (20) to complete removal.
Disassembly