Cutlass Ciera V6-173 2.8L (1988)
Throttle Cable/Linkage: Customer Interest
Fuel System - Accelerator Binds/Cruise Control Problem
SUBJECT
HIGH ACCELERATOR PEDAL EFFORT/INOPERATIVE
CRUISE CONTROL SYSTEM (NEW SERVICE KIT)
MODELS/YEARS
1987 FIRENZA, 1987-88 CUTLASS CIERA, 1988
CUTLASS SUPREME MODELS WITH 2.8L ENGINE (VIN CODE W)
NUMBER:
88-T-134
CORP.REF.NO: 836313R
DATE:
April 1989
SECTION:
6E3
CONDITION:
Some customers may comment about high accelerator pedal operating efforts and/or inoperative cruise control system on 1987-88 Cutlass Ciera, Firenza
or Cutlass Supreme models with 2.8L V6 engine (VIN Code W).
CAUSE:
The high effort or loss of cruise may be attributed to a wear condition in the throttle body actuating linkage. This condition may be repaired by replacing
the throttle body actuating linkage using components in the service kit. The following procedure should be used to replace the components.