Cutlass Ciera V6-3100 3.1L VIN M SFI (1996)
2. If the PCM fails to program, check the Techline equipment for the latest software version.
3. Attempt to program the PCM. If the PCM still cannot be programmed properly, replace the PCM. The replacement PCM must be programmed.
FUNCTIONAL CHECK
1. Perform the On-Board Diagnostic System Check.
2. Start the engine and the engine run for one minute.
3. Use the scan tool in order to scan for the DTCs.
4. If DTC P0325 sets, the KS module is not fully seated, is missing, or is malfunctioning.