Cutlass Ciera V6-3300 3.3L MFI VIN N (1993)
-
The balancer is serviced as an assembly. Do not attempt to separate pulley from balancer hub.
INSTALL OR CONNECT
1. Crankshaft balancer
-
Lubricate seal surface with engine oil.
2. Balancer bolt while holding flywheel using J 37096.
Tighten
-
Balancer bolt to 150 N.m (111 lb. ft.) + 76° using J 36660.
3. Right engine splash shield.
4. Right front wheel and tire assembly.
5. Flywheel access covers.
6. Lower vehicle.
7. Serpentine belt.
