Cutlass Ciera V6-3300 3.3L MFI VIN N (1993)
Intake Manifold: Specifications
Intake Manifold Replace
Intake Manifold
Intake Manifold Tightening Sequence
REMOVE
1. Raise hood and cover fenders.
2. De-pressurize and disconnect fuel pipes from fuel rail.
3. Negative battery cable.
4. Drain coolant.
5. Accessory drive belt.
6. Generator and braces.
7. Power steering pump braces.
8. Coolant bypass hose.
9. Heater pipe.
10. Upper radiator hose.
11. Air inlet duct.
12. Throttle cable bracket and cables from throttle body.
13. Vacuum hoses from intake manifold.
14. Electrical connections.
15. Fuel rail.
