Cutlass Ciera Cruiser L4-151 2.5L (1985)
PROCEDURE 9 - NO "HI" MODE
Blades Cycle In and Out of Park Position When Wiper - Procedure 10 Is Shut Off
PROCEDURE 10 - BLADES CYCLE IN AND OUT OFPARK POSITION WHEN WIPER IS OFF
Motor End Cover Replacement - Procedure 11 (
see page 9)
Before performing any diagnosis of the system to determine the cause of these conditions, the following two items should be checked: A) Wiper fuse is
not blown; and, B) That the wiper motor ground strap is secure and that the ground strap has continuity to the body ground.
NOTICE:
When the diagnostic procedure requires wiper motor operation, the windshield and wiper blades must be cleaned to avoid damaging glass.
Motor End Cover Replacement - Procedure 11
1.
Check motor grounds.