Cutlass Ciera Cruiser V6-3100 3.1L MFI VIN M (1994)
Fig. 14 Switch Removal Preparation
Fig. 15 Switch Removal
FRONT
Refer to Figs. 12 through 15 during the following procedure.
Fixed Column
1. Remove ignition and dimmer switches as outlined under Starting and Charging/Starting System/Ignition Switch/Service and Repair. See:
Steering and Suspension/Steering/Steering Column/Service and Repair
2. Disconnect battery ground cable.
3. Remove shaft lock cover, then shaft retaining ring using tool No. J 23653-C, or equivalent, to push down shaft lock. Dispose of ring.
4. Remove shaft lock, then turn signal cancelling cam assembly.