Cutlass Ciera Cruiser V6-3300 3.3L MFI VIN N (1993)
Backing Plate: Service and Repair
Installation
Wheel Cylinder
1. Install backing plate to axle assembly.
2. Install Anti-Lock Brake (ABS) wheel speed sensor wire.
3. Install hub and bearing assembly with bolts.
^
Tighten bolts to 63 Nm (47 lbs. ft.).
4. Install hydraulic line at wheel cylinder.
^
Torque inlet tube nut to 17 Nm (12 lbs. ft.).
5. Install parking brake cable to backing plate.
6. Install brake components. Refer to Brake Shoe/Service and Repair/Installation.See: Brake Shoe/Service and Repair/Installation
7. Install wheel and tire assembly.
8. Bleed brakes.
9. Adjust rear brakes. Refer to Brake Shoe/Adjustment.See: Brake Shoe/Adjustments
10. Adjust parking brake. Refer to Parking Brake/Adjustments. See: Parking Brake System/Adjustments