Cutlass Ciera Cruiser V6-3300 3.3L MFI VIN N (1993)
Brake Drum: Service and Repair
Installation
For additional information see Notes, Warnings, and Hints. See: Fundamentals and Basics
Measuring Brake Drum Inside Diameter
Adjusting Brake Shoe To Drum Clearance
1. If brake shoes have been replaced or the adjusting screw has been moved the shoes should be adjusted. To do this use a suitable brake drum to
shoe gauge, measure brake drum inside diameter. Adjust brake shoes to dimension obtained on outside portion of gauge. Refer to Brake
Shoe/Adjustments.See: Brake Shoe/Adjustments
2. Install the brake drum.
3. Install the tire and wheel assembly while noting alignment marks.
4. Lower vehicle and torque wheel nuts to 140 Nm (100 ft. lbs.).
